George's Tool Rental Logo

BROWSE OUR SITE

mach

propane

APPLICATIONS

divider
bestof10 Logo

Stihl Logo

Honda Logo
Reader's Choice Logo

ARA Logo
Skip Navigation LinksHome > Rental Catalog > Floor Care - Installation

Floor Care - Installation Floor Care - Installation George's Tool Rental

$0.00/minimum
48574
Swivel heads rotate to use the second sharp edge of the blade without having to remove the blade
Swivel head allows blade to stay in contact with the floor

$0.00/minimum
48585
Designed for ceramic removal and thin-set rescraping
$0.00/minimum
48577
The longer taper works great on tough wood floors (glued & nailed)
The long length allows the blade to easily slide under tough material
Works well on most ceramics and VCT
$17.00/minimum
7905
MANUAL HARDWOOD FLOOR NAILER
SETUP TO DO 3/4" TONGUE & GROOVE FLOORING
USES A 2" "L" CLEATED NAIL
$28.00/minimum
3226
5" pad - 3200 RPM
8" long top kick extension with 5" pad
1 HP motor
Unit size 105/8 x 107/8 x 105/8 "
Weight* 32 lbs
$0.00/minimum
48570
Swivel heads rotate to use the second sharp edge of the blade without having to remove the blade
Swivel head allows blade to stay in contact with the floor

$0.00/minimum
48590
Designed for ceramic removal and thin-set rescraping
$28.00/minimum
3227
7" pad - 3200 RPM
8" long top kick extension with 7" pad
1 HP motor
Unit size 105/8 x 107/8 x 105/8 "
Weight* 32 lbs
$22.00/minimum
0420
1/4" CROWN FINISH STAPLER
1/2" TO 1 1/2" LONG STAPLE
SETUP FOR 1/4" AIR HOSE
OPERATING PRESSURE: 70-120 PSI
STAPLE CAPACITY: 125
9 23/32" LONG X 2 7/32" WIDE X 8" HIGH
2.9 LBS
$40.00/minimum
3224
RPM: 1500
MOTOR: 1.5 HP
AMP: 15
WEIGHT: 106 LBS
20" PAD
$22.00/minimum
3203
3 GAL. SOLUTION TANK
SPRAYS, SCRUBS AND VACUUMS IN ONE PASS
120V
12" WIDE, 25" TALL, 19.5" DEEP
WEIGHT: 39LBS
$34.00/minimum
3202
SEE SERIALIZED ITEMS FOR SPECS
$22.00/minimum
3201
POWER SOURCE: 115V
MOTOR: 1/2 HP
AMPS: 6.5
IMPELLER: 10 5/8"
CFM: 2500
3 SPEED W/ ROTARY SWITCH
$5.00/minimum
3210
$6.00/minimum
3231
$10.00/minimum
3211
$22.00/minimum
3221
Consists of: One stretcher head and tail, three extensions and sleeves

Adjusts up to 23.5'
ROBERTS TOOL & S GT JUNIOR
$22.00/minimum
3223
Consists of: One stretcher head and tail, five extensions and sleeves

Adjusts from 37" to 22'
$20.00/minimum
3212
$5.00/minimum
3213
$5.00/minimum
3252
$12.00/minimum
3214
$34.00/minimum
3205
VOLTS: 110 / 120
AMPS: 15
DRUM WIDTH: 8"
WEIGHT: 105 LBS
LENGTH: 39 1/4"
WIDTH: 15 1/2"
HEIGHT: 32"
$34.00/minimum
46118
Dyma Serts are diamond segments welded to a backing plate to improve grinding speed and remove tough coatings.
Dyma-Serts grind 5 times faster than grinding stones and last longer - up to 30,000 square feet (2,800 sq. m.) of grinding action....
EDCO
$68.00/minimum
2830
Dyma Serts are diamond segments welded to a backing plate to improve grinding speed and remove tough coatings.
Dyma-Serts grind 5 times faster than grinding stones and last longer - up to 30,000 square feet (2,800 sq. m.) of grinding action....
EDCO
$17.00/minimum
3233
$28.00/minimum
3199
WEIGHT38LBS
HEIGHT 14.7" WIDTH 25.4" DEPTH 26"
7.5 AMPS 746 WATTS(1 HP)
25FT CORD
$28.00/minimum
0437
ADJUSTABLE FOR USE ON 3/8", 1/2" & 5/8" AND SOME 3/4" FLOORING
DESIGNED FOR USE ON EXOTICS, BAMBOO AND OTHER SOLID OR ENGINEERED FLOORING.
USES 18 GAUGE POWERCLEAT NAILS 3/4", 1", 1 1/2" AND 1 3/4"
HOLDS APROX 100 NAILS (1...
$28.00/minimum
3215
RPM: 175
MOTOR: 1/3 HP
AMPS: 7.1
WEIGHT: 36 LBS
$34.00/minimum
3216
RPM: 175
MOTOR: 1 HP
AMP: 14
WEIGHT: 102 LBS
$150.00/minimum
49404
HEIGHT: 4' 3" (51.8")
LENGTH: 3' 7" (44")
WIDTH WITH SQUEEGEE 2' 3" (27.2")
WIDTH WITHOUT SQUEEGEE 2' (23.4")
WEIGHT: 726 LBS
BATTERY POWERED: 3 HRS RUN TIME PER CHARGE
CHARGER: ON BOARD 110V
PRODUCTIVITY: AVERAGE...
$118.00/minimum
3251
SEE SERIALIZED NUMBERS FOR SPECS
$22.00/minimum
0413
SETUP FOR 1/4" AIR HOSE
RECOMMEND A 4CFM COMPRESSOR
STAPLE SIZE: 1 1/2"-2" STAPLE, 1/2" CROWN, GLUED
$22.00/minimum
0436
18-Gauge 7/32" Narrow Crown Staples are used
Tool-free adjustable foot adapts to 1/4" to 7/16" engineered flooring
Height 9.63"
Length 10.13"
Width 3"
Weight 3.2 lbs
Driving Power 170 Inch Lbs.
Fastener Range 1/2"...
$57.00/minimum
3200
3/4 HP, 10.5 AMPS
LENGTH 38.5", WIDTH 24.5", WEIGHT 149LBS
Remove up to 200 sq. ft. per hour of vinyl or other related soft material

(Square footage amounts and time schedules will vary based on material and adhesion)

$43.00/minimum
47417
WORKING WIDTH: 16"
SOLUTION TANK CAPACITY: 2.5 GAL
BRUSH MOTOR: 2.5 HP, 120V
VACUUM MOTOR: 0.6 HP, 120V
WEIGHT: 66 LBS
DIMENSIONS: 20.5" L X 18.5" W X 15" H
HANDLE FOLDS DOWN FOR TRANSPORT
BLITZ CLEANER RECOMMENDED
$17.00/minimum
7906
The Powernailer Model 101 surface nailer is used instead of hand nailing when starting boards are next to a wall.
Can be used with 1/2", 3/4" and 33-32" thickness flooring using
1-1/2", 1-3/4" and 2" flooring nails
$112.00/minimum
3229
PRICE INCLUDES 12 EDGES (1 EDGE OF EACH CHIP)
ADDITIONAL EDGES ARE CHARGED AT $5.00 PER EDGE USED.
15" Plate with 12 carbide pins.

Use for scraping and removal of a variety of coatings, glue/foam backing, thinset, and paints from...
$17.00/minimum
3208
$17.00/minimum
3209
GUNDLACH 3209-0001
$34.00/minimum
3217
SANDING WIDTH: 18"
1 HP MOTOR, 115V, 15AMP, 50' POWER CORD
WEIGHT: 125 LBS
LENGTH: 18 1/2"
WIDTH: 20"
HEIGHT: 45"
$28.00/minimum
3234
SQUAR BUFF
$11.00/minimum
47654
Make Quick Work of Epoxy Coatings & Hard Glue.
Four times stronger than carbide, with remarkable wear resistance.

Ideal for the removal of: Hard Tacky Surfaces, Urethane Epoxy, Multi-Part Epoxy, Water-Proofing Membrane, Pool Deck...
$349.00/minimum
47289
WIDTH -----------------------------------------24 1/2"
HEIGHT W/SEAT---------------------------48"
LENGTH W/O JAW-------------------------54"
EMPTY WEIGHT----------------------------1847 LBS
FULLY...
$22.00/minimum
3207
VOLTS/AMPS: 115 / 15
DISC SIZE: 7"
WEIGHT: 31 LBS
$17.00/minimum
42728
Replaces high productivity pads. For heavy duty scrubbing of concrete and aggressive stripping of resilient floors. Filled with blue colored, .060" DuPont Tynexo A nylon fibers impregnated with 46 grit silicon carbide. Trim 1-3/4".
$50.00/minimum
46117
Carbide inserts are carbide tipped blocks designed to clean floors without grinding into the concrete.
they have a replaceable, multi-sided tungsten carbide edge that can be rotated for maximum use.
Ideal for:
Removing mastics,...
$100.00/minimum
3204
Carbide inserts are carbide tipped blocks designed to clean floors without grinding into the concrete.
they have a replaceable, multi-sided tungsten carbide edge that can be rotated for maximum use.
Ideal for:
Removing mastics,...
$0.00/minimum
48594
Designed for ceramic removal and thin-set rescraping
$17.00/minimum
7904
$34.00/minimum
3235
HP- 1 1/2
15 AMP MINIMUM CIRCUT
(x4) 6" PADS
$28.00/minimum
3218
VOLTS/AMPS: 120 / 8.3
CAPACITY: 18 GAL
HOSE LENGTH: 10' X 1 1/2"
WEIGHT: 44 LBS (APPROX)
HP: 1.6
$73.00/minimum
1899
200CFM, 3.2 HP SINGLE PHASE 110V 16 AMP MINIMUM
LENGTH: 32", HEIGHT: 35", WIDTH 20" WEIGHT 90LBS
HOSE 2"-27' FT
9 GAL CAPACITY
DRY VACUUM ONLY (DO NOT USE WET)
50FT CORD MAXIMUM
13 SQ. FT. SURFACE AREA MICRO CLEAN FILTER
$10.00/minimum
3232
$0.00/minimum
48597
Copyright © 2011-2012 Site designed and powered by Media Fusion Technologies, Inc.